simatherm IH 070
The IH 070 is the perfect choice to heat small and medium size bearings with a weight up to 80 kg.
The heater is available in two power executions; 230V/50Hz and 110V/60Hz.
Three yokes are included as standard equipment. The swivel arm is optional.
Technical Data:
|
Criteria
Designation |
Designation
IH 070/230V, 50 Hz IH 070/110V, 60 Hz |
|
Workpiece - maximum weight - bore diameter |
80 kg 20 - 400 mm |
|
Temperature control - range - magnetic probe - accuracy (electronics) |
0 - 250 °C yes, type K +/- 3 °C |
|
Time control - range - accuracy |
0 - 60 minutes +/- 0.01 seconds |
|
Maximum temperature |
400 °C |
|
Thermometer mode |
yes |
|
Bearing temperature mode |
yes |
|
Power reduction |
4 step / 20-40-60-80 % |
|
Automatic demagnetisation residual magnetism |
yes <2A/cm |
|
Can heat sealed bearings |
yes |
|
Can heat pre-greased bearings |
yes |
|
Error guiding codes |
yes |
|
Thermal overload protection |
yes |
|
Maximum magnetic flux |
1.5 T |
|
Control panel |
Keyboard with LED-display |
|
Size of the operating area (W x H) |
145 x 205 mm |
|
Coil diameter |
115 mm |
|
Dimensions (W x D x H) |
420 x 280 x 345 mm |
|
Overall weight including yokes |
35 kg |
|
Maximum power consumption |
3.7 / 2.2 kVA |
|
Standard yokes |
14 x 14 x 275 mm 28 x 28 x 275 mm 55 x 55 x 275 mm |
|
Core cross section |
55 x 55 mm |
|
Yoke storage |
yes, internal |
|
Sliding arm |
- |
|
Swivel arm |
optional |
|
Cooling fan |
- |
|
Housing material |
Aluminium |