simatherm IH 210
The IH 210 is the best solution to heat large size bearings with a weight up to 300 kg.
The heater is availabe in two power executions; 400V/50Hz and 460V/60Hz.
Two yokes are included as standard equipment. The sliding arm facilitates an easy placement and removal of the bearing.
The fan version, IH 210F, allows continuous use in serial production.
Technical Data:
|
Criteria
Designation |
Designation
IH 210/400V, 50 Hz - 460V/60Hz IH 210/500V, 50 Hz - 575V/60Hz |
|
Workpiece - maximum weight - bore diameter |
300 kg 60 - 600 mm |
|
Temperature control - range - magnetic probe - accuracy (electronics) |
0 - 250 °C yes, type K +/- 3 °C |
|
Time control - range - accuracy |
0 - 60 minutes +/- 0.01 seconds |
|
Maximum temperature |
400 °C |
|
Thermometer mode |
yes |
|
Bearing temperature mode |
yes |
|
Power reduction |
4-step / 20-40-60-80 % |
|
Automatic demagnetisation residual magnetism |
yes <2A/cm |
|
Can heat sealed bearings |
yes |
|
Can heat pre-greased bearings |
yes |
|
Error guiding codes |
yes |
|
Thermal overload protection |
yes |
|
Maximum magnetic flux |
1.5 T |
|
Control panel |
Keyboard with LED-display |
|
Size of the operating area (W x H) |
250 x 250 mm |
|
Coil diameter |
135 mm |
|
Dimensions (W x D x H) |
600 x 350 x 420 mm |
|
Overall weight including yokes |
75 kg |
|
Maximum power consumption |
10 / 11.5 kVA |
|
Standard yokes |
40 x 40 x 420 mm 70 x 70 x 420 mm |
|
Core cross section |
70 x 70 mm |
|
Yoke storage |
yes, internal |
|
Sliding arm |
yes |
|
Swivel arm |
- |
|
Cooling fan |
optional |
|
Housing material |
Aluminium |